There are two ways off programming an MFT actuator. You can use the ZTH US handheld device and using one of the provided cables you can connect to the actuator. The ZTH US will allow you to change several parameters on the MFT actuators line like minimum position, maximum position, control signal, feedback signal and running time. The ZTH US can also work as an interface to connect to a laptop or desktop computer, and using the PC TOOL change parameters or run diagnostic tests.
Please refer to the PC TOOL technical document for additional information.
PC-Tool MFT-P, V3.14, Full Version (zip -147.63 MB)